My Profile
Active Members
TodayLast 7 Days
more...
Awards & Gifts
Online Exams
Fresher Jobs
Our fresher job section is exclusively for fresh graduates! Find jobs for freshers in major Indian
cities including Bangalore, Chennai, Hyderabad, Pune or Kochi
Resources
Find educational articles, blogs, discussion threads and other resources.
Colleges
Find details about any college in India or search for courses.
|
Download Model question papers & previous years question papers
|
Posted By: cdteja Member Level: Silver Posted Date: 27 Nov 2007
|
2005 Jawaharlal Nehru Technological University jntu Question paper
Code No: NR10107 NR
I B.Tech Supplementary Examinations, November/December 2005
ENGINEERING GRAPHICS
( Common to Civil Engineering, Mechanical Engineering, Mechatronics,
Metallurgy & Material Technology, Production Engineering and
Aeronautical Engineering)
Time: 3 hours Max Marks: 80
Answer any FIVE Questions
All Questions carry equal marks
? ? ? ? ?
1. The distance between Vadodara and Surat is 130 Km. A train covers this distance
in 2.5 hours. Construct a plain scale to measure time up to a single minute. The
R.F of the scale is 1: 2,60,000. Show the distance covered by the train in 45 secs.
[16M]
2. A circle of 45 mm diameter rolls inside another circle of 180mm diameter for one
revolution. Draw the locus of a point, which is at a distance of 20 mm from the
center of the rolling circle . [16M]
3. A hexagonal plane of 30 mm side has a corner in the V.P. and the surface of the
plane makes an angle 40 degrees with the V.P. Draw its projections when the front
view of the diagonal through The corner which is in V.P. makes an angle of 50
degrees to H.P. [16M]
4. A hexagonal prism of base of side 30mm and axis length 70mm rests on one of its
corners on the HP, the two edges of the base containing the corner being equally
inclined to the HP. The axis is inclined at 300 to the HP and parallel to VP. The
prism is cut by a plane perpendicular to the VP and inclined at 450to the HP. The
cutting plane meets the axis at a distance 34 mm from the top end. Draw its front,
the sectional top views and the true shape of the section. [16M]
5. A vertical hexagonal prism of 25 mm side of base and axis 60 mm has one of
its rectangular faces parallel to VP. A circular hole of 40 mm diameter is drilled
through the prism such that the axis of the hole bisects the axis of the prism at
right angle and is perpendicular to VP. Draw the development of the lateral surface
of the prism showing the true shape of the hole in it. [16]
6. Draw the isometric view of a cone 40 mm diameter and axis 55 mm long when its
axis is horizontal. Draw isometric scale. [16]
7. Consider the picture shown in figure1 below and draw the front view top view and
side view in first angle projection. [16M]
8. Draw the perspective view of a straight line AB, 35 mm long parallel to both the
picture plane and ground plane, and 7 mm above the ground plane, and 18 mm
behind the picture plane. The station point is 50 mm in front of the picture plane,
36 mm above the ground plane and is contained by a central plane 16 mm to the
left of end A. [16M]
1 of 2
Code No: NR10107 NR
Figure 1:
? ? ? ? ?
2 of 2
Return to question paper search
|
|
|
Submit Previous Years University Question Papers and make money from adsense revenue sharing program
Are you preparing for a university examination? Download model question papers
and practise before you write the exam.
|
Watch TV Channels
|