2011 Anna University Chennai Technical english — i Question paper
B.E./B.Tech. DEGREE EXAMINATION, JANUARY 2011.
Common to all branches
186101 — TECHNICAL ENGLISH — I
Time : Three hours Maximum : 100 Marks
Answer ALL questions
PART A — (10 × 2 = 20 marks)
1. Match the words in column A with their meanings in colunm B : (4 × 2
1 = 2)
(a) Hazard (i) very important
(b) Consumption (ii) conservation
(c) Sustainable (iii) danger
(d) Critical (iv) use
(v) able to continue over a period of time
2. Change the following into passive voice :
(a) The Government of India gives awards to outstanding scientists.
(b) All sections of people discuss climate change today.
3. Make opposite words from the following words, using appropriate prefixes :
(4 × 2
1 = 2)
4. Fill in the blanks with suitable tense forms of the verbs given in brackets :
Accidents always –––––––––––––– (happen) at a point of time and space.
Given the fatalities, it –––––––––––––– (work out) to 0.00328 per cent of the
total road user kilometers everyday along these stretches of highways. A small
number really, but a massive loss if you –––––––––––––– (think) of the lifetime
earning potential of those who –––––––––––––– (die) in these mishaps.
5. Fill in the blanks with suitable comparative adjectives, using the words given
in brackets :
(a) A fan is –––––––––––––– (cheap) an air conditioner.
(b) Nanotechnology is –––––––––––––– (popular) any other subject today.
(c) Nothing is –––––––––––––– (difficult) concentrating on a subject we don't
(d) Laptops are –––––––––––––– (convenient) desktop computers.
6. Expand the following compound nouns :
(a) technology policy
(b) health centre
(c) road transport
(d) electricity bill
7. Edit the following :
The atmosphere make life possible on planet earth because of their three very
important functions: it contains life giving oxygen; it keeps earth warm; and it
absorbs the deadly ultraviolet rays of the suns radiation.
8. Use TWO of the following cause and effect expressions in separate sentences of
your own :
(a) lead to
(b) because of
(c) due to
9. Define TWO of the following : (2 × 1= 2)
(b) wrist watch
10. Complete the following 'If' conditional sentences: (2 × 1= 2)
(a) If you had watched the commonwealth games, –––––––––––––– the
(b) If ––––––––––––––, it will boil at 100°C.
PART B —
11. Read the following passage carefully and answer the questions given at the
end of it :....netcafeworld.com
Think of an electric car that can accelerate swiftly to cruising speed, laptop
computers that can recharge in a couple of minutes rather than hours and a
generation of super-miniature mobile phones. That's the vision sketched by a
pair of scientists in the United States, unveiling an invention that they say
could lead to a smaller, lighter and more power-packed lithium battery than
anything available today.
Current batteries made of lithium iron phosphate (LiFePO4) are good at
storing large amounts of electricity but stumble at releasing it. They are better
at dispensing the power in a steady flow than at discharging it or gaining it in
a sudden burst. As a result, electric cars perform best when travelling along
the motorway at a constant speed rather than when they are accelerating, and
their batteries take hours to recharge when they run down.
Until now, the finger of blame has pointed at charged lithium atoms. These
ions, along with electrons, move too sluggishly through the battery material
before arriving at the terminal to deliver their charge -- or so it was thought.
But two materials experts at the Massachusetts Institute of Technology (MIT)
say the problem lies not with the ions but rather at how the ions gain access to
nano-scale tunnels that riddle the material and transport the electrons to their
destination. Their solution was a lithium phosphate coating that, like a system
of feeder roads, nudges the ions towards the tunnels. The ions then zip
instantly down the tunnel entrance and to the terminal.
A small cellphone battery can be recharged in just 10 seconds, thanks to the
improved ion flow, they report in the British journal Nature. In theory, a large
battery that would be used to power a plug-in hybrid electric car could be
recharged in just five minutes, compared to up to six or eight hours at present.
But this would only be possible if a beefed-up electricity supply were available.
Unlike other battery materials, the tweaked LiFePO4 does not degrade as
much when repeatedly charged and recharged. This opens the way to smaller
and lighter batteries, which will not need such heft to deliver the same power.
The invention, which was supported by US government funds, has already
been licensed by two companies.
Because the material involved is not new -- the difference is the way it is made
-- "the work could make it into the marketplace within two to three years," it
said. The invention is the latest claimed advance in the quest to replace
conventional electro-chemical batteries, which are heavy, lack energy density
and take time to recharge.
(a) Choose the correct answer :
(i) What idea the US scientists visualize?
(1) electronic car
(2) laptop computers
(3) fast recharging of batteries
(4) super miniature mobile phones
(ii) What are the present day batteries made of?
(1) lithium iron
(2) lithium iron phosphate
(3) electro chemical batteries
(4) lithium phosphate
(iii) What is the major problem with current batteries?
(1) they don't give power steadily
(2) they store enormous electricity
(3) they are difficult to use
(4) they cannot be charged often
(iv) What solution do the MIT scientists give?
(1) lithium coating
(2) phosphate coating
(3) lithium phosphate coating
(4) lithium battery coating
(v) What is new in the solution?
(1) the way in which coating is done
(2) the way in which the material is prepared
(3) the way in which recharging is done
(4) the way in which research is carried out
(b) Mention whether the following statements are TRUE or FALSE :
(i) We can imagine a day when very quick recharging of batteries is
(ii) Laptops and mobile phones alone can be recharged fast.
(iii) Currently available batteries give power steadily.
(iv) Materials experts are interested in batteries only.
(v) This research result can be put into commercial use soon.
(c) Choose the appropriate definition for the given words as they are used in
the text :
(4) steady and moderate
(1) giving medicine
(v) run down
(1) stop functioning
(2) fall down
(3) go down
(4) start functioning
12. (a) Write a set of instructions for operating the ticket vending machine at a
(b) Write a set of instructions for using your cell phone safely. (16)
13. (a) Write a letter to your principal asking for permission to visit a company
related to your branch of study as a part of your educational programme.
(b) Assume that you are the Vice-Chancellor of a well-known university.
Write a letter of acceptance to the Secretary of the Students Union of an
engineering college for inaugurating the annual day function of your
14. (a) Write a paragraph of 200 words describing your computer practice
(b) Write a coherent paragraph of 200 words describing your difficulties in
adjusting to the new situation when you joined the college. (16)
15. Given below are two passages. Read one of them to draw a flowchart.
(a) The process of making photocopies
Static electricity enables a photocopier to produce almost instant copies
of documents. At the heart of the machine is a metal drum which is given
a negative charge at the beginning of the copying cycle. The optical
system then projects an image of the document on the drum. The electric
charge disappears where light strikes the metal surface, so only dark
parts of the image remain charged.
Positively charged particles of toner powder are then applied to the
drum. The charged parts of the drum attract the dark powder, which is
then transferred to a piece of paper. A heater seals the powder to the
paper, and a warm copy of the document emerges from the photocopier
(b) The process of making bread
Bread is eaten in most parts of the world, but not everyone knows how to
bake it. I am going to show you the steps involved in baking bread.
First, measure the correct amount of flour and warm water. Next, mix
the flour and water together in a mixing bowl. Add yeast, salt and sugar.
Next, knead the mixture until it feels almost dry. Leave the mixture for
about an hour in a warm place. It will grow in size. After this, knead the
mixture again. Make sure the mixture is not sticky when you touch it.
Then leave the dough in a baking tin for about an hour to give it time to
rise. Finally, the dough is put into a preheated oven for about forty
It can be seen that making bread is not difficult as long as the correct
procedure is followed. You will love the taste and smell of your freshlybaked
Return to question paper search