Download Model question papers & previous years question papers

Posted Date: 05 Jul 2016      Posted By:: Krishna Teja Yeluripati    Member Level: Gold  Points: 3 (Rs. 3)

2014 Acharya Nagarjuna University II/IV B.Tech - 2nd Semester - Bapatla Engineering College - Electrical and Electronic Measurements - January 2014 Question paper

Course:   University/board: Acharya Nagarjuna University

Do you want the old question papers of Electrical and Electronic Measurements - Bapatla Engineering College - B.Tech? This is the original question paper from the B.Tech second year second semester exam conducted by Bapatla Engineering College in January 2014. Feel free to make a copy and use it to prepare for your upcoming exams.

II/IV B.Tech Degree Examinations, January 2014

Second Semester

Electrical and Electronic Measurements

Time : 3 hours

Maximum Marks : 60

Answer question No.1 Compulsory

Answer ONE question from each Unit

1. Answer the following [12 x 1 = 12M]
a) List the different types of errors in instrumentation.
b) What is the use of swamping resistor in PMMC instrument?
c) Define the term voltmeter sensitivity.
d) What is the difference between Maxwell's and Hays Bridge?
e) Write differences between AC and DC bridges?
f) What are the sources if errors in digital voltmeter?
g) What is the necessity of time base in CRO?
h) Define the term secondary emission ratio.
i) Name at least five front panel controls in CRO.
j) Define the term harmonic distortion.
k) What is the advantage of hetero dyne spectrum analyzer?
l) Define duty cycle.

UNIT - I [1 x 12 = 12M]

2. a) Explain the significance of statistical analysis in instrumentation.
2. b) Define the terms Accuracy, Precision, Limiting errors. (OR)
3. a) Describe the construction and working of series type ohm meter.
3. b) Explain working of electrodynamometer in power measurement.

UNIT - II [1 x 12 = 12M]

4. a) Explain how you will measure unknown capacitance using Schering Bridge.
4. b) Explain how stray capacitance is minimized using Wagner ground connection. (OR)
5. a) Explain the block diagram of true RMS responding voltmeter.
5. b) Draw the circuit diagram of Q meter and explain its functioning.

UNIT - III [1 x 12 = 12M]

6. a) Explain the measurement of voltage, frequency and phase using CRO.
6. b) Draw the block diagram of dual trace oscilloscope and explain its working. (OR)
7. a) Draw and explain the working of sampling oscilloscope.
7. b) Write short notes on oscilloscope probes.

UNIT - IV [1 x 12 = 12M]

8. a) Explain the operation of a square wave generator.
8. b) Draw the block diagram of heterodyne type spectrum analyzer and explain its working. (OR)
9. a) Draw the block diagram of a wave analyzer and explain its working.
9. b) Explain the working of a frequency divider generator.

Return to question paper search

Next Question Paper: II/IV B.Tech - 2nd Semester - Electronic Circuits I - Bapatla Engineering College - January 2014

Previous Question Paper: Bapatla Engineering College - Elements of Mechanical Engineering - II/IV B.Tech - 2nd Semester - January 2014

Related Question Papers:

  • B.Tech - Semester 3 - Network Analysis and Synthesis - Bapatla Engineering College - June 2014

  • B.Tech - Semester 3 - Bapatla Engineering College - Electrical Technology - June 2014

  • Bapatla Engineering College - Electromagnetic Field Theory - B.Tech 2nd Year - Semester 1 - June 2014

  • Electronic Devices - Bapatla Engineering College - B.Tech 2nd Year - Semester 1 - June 2014

  • B.Tech 2nd Year - Semester 1 - Digital Electronics - Bapatla Engineering College - June 2014

  • Categories

    Submit Previous Years University Question Papers and make money from adsense revenue sharing program

    Are you preparing for a university examination? Download model question papers and practise before you write the exam.

    Awards & Gifts
    Top Contributors
    TodayLast 7 Daysmore...

    ISC Technologies, Kochi - India. © All Rights Reserved.