Download Model question papers & previous years question papers

Posted Date: 05 Jul 2016      Posted By:: Krishna Teja Yeluripati    Member Level: Gold  Points: 3 (Rs. 3)

2014 Acharya Nagarjuna University Bapatla Engineering College - Electrical and Electronic Measurements - B.Tech 2nd Year - 2nd Semester - June 2014 Question paper

Course:   University/board: Acharya Nagarjuna University

If you are looking for the previous question papers of Electrical and Electronic Measurements - Bapatla Engineering College - B.Tech, you can stop your search here. This is the original question paper from the B.Tech second year second semester exam conducted by Bapatla Engineering College in June 2014. Feel free to store a copy and use it to prepare for your upcoming exams.

II/IV B.Tech Degree Examinations, June 2014

Second Semester

Electrical and Electronic Measurements

Time : 3 hours

Maximum Marks : 60

Answer question No.1 Compulsory

Answer ONE question from each Unit

1. Briefly explain following [12 x 1 = 12M]
a) What is a delay line?
b) What is the use of swamping resistor in PMMC instrument?
c) What are the advantages of using thermocouple instrument?
d) List some of the front panel controls of function generator?
e) Write differences between AC and DC bridges?
f) What is an instrument transformer?
g) Explain about Ammeter loading effect.
h) Define the term secondary emission ratio.
i) Name at least five front panel controls in CRO.
j) Define the term harmonic distortion.
k) Explain the procedure to find unknown frequency using Lissajous figures?
l) What are the precautions to be taken in signal generator applications?

UNIT - I [1 x 12 = 12M]

2. a) Classify and explain the types of errors occurring in measurements.
2. b) Define Voltmeter Sensitivity? What is loading effect of a DC Voltmeter with an example? (OR)
3. a) Describe the construction and working of shunt type ohm meter.
3. b) Explain working of electrodynamometer in power measurement.

UNIT - II [1 x 12 = 12M]

4. a) Draw the Maxwell's bridge circuit and derive the expression for the unknown elements at balance.
4. b) Explain the working of Dual Slope DVM. (OR)
5. a) Explain the block diagram of true RMS responding voltmeter.
5. b) Explain the method of AC measurement using rectifier type instruments.

UNIT - III [1 x 12 = 12M]

6. a) Explain the measurement of voltage, frequency and phase using CRO.
6. b) Draw the block diagram of dual trace oscilloscope and explain its working. (OR)
7. a) Draw and explain the working of sampling oscilloscope.
7. b) Explain the operation of 10:1 probe.

UNIT - IV [1 x 12 = 12M]

8. a) Explain the principle and working of function generator.
8. b) Draw the block diagram of heterodyne type spectrum analyzer and explain its working. (OR)
9. a) Draw the block diagram of a wave analyzer and explain its working.
9. b) Explain the working of a frequency divider generator.

Return to question paper search

Next Question Paper: B.Tech 2nd Year - 2nd Semester - Bapatla Engineering College - Electronic Circuits I - June 2014

Previous Question Paper: Elements of Mechanical Engineering - Bapatla Engineering College - B.Tech 2nd Year - 2nd Semester - June 2014

Related Question Papers:

  • II/IV B.Tech - 2nd Semester - Electronic Circuits I - Bapatla Engineering College - January 2014

  • Bapatla Engineering College - Data Structures using C - B.Tech - Semester 4 - January 2014

  • Signals and Systems - Bapatla Engineering College - B.Tech - Semester 4 - January 2014

  • B.Tech - Semester 3 - Network Analysis and Synthesis - Bapatla Engineering College - June 2014

  • B.Tech - Semester 3 - Bapatla Engineering College - Electrical Technology - June 2014

  • Categories

    Submit Previous Years University Question Papers and make money from adsense revenue sharing program

    Are you preparing for a university examination? Download model question papers and practise before you write the exam.

    Awards & Gifts
    Top Contributors
    TodayLast 7 Daysmore...

    ISC Technologies, Kochi - India. © All Rights Reserved.