Posted Date: 05 Jul 2016      Posted By:: Krishna Teja Yeluripati    Member Level: Gold  Points: 3 (Rs. 3)

# 2014 Acharya Nagarjuna University III/IV B.Tech - Semester 1 - Linear ICs and Applications - Bapatla Engineering College - April 2014 Question paper

 Course: University/board: Acharya Nagarjuna University

Do you need the old question papers of Linear ICs and Applications - Bapatla Engineering College - B.Tech? This is the original question paper from the B.Tech third year first semester exam conducted by Bapatla Engineering College in April 2014. Feel free to make a copy and use it to prepare for your upcoming exams.

III/IV B.Tech Degree Examinations, April 2014

First Semester

Linear ICs and Applications

Time : 3 hours

Maximum Marks : 60

Answer ONE question from each Unit

1. Briefly explain following [12 x 1 = 12M]
a) List the characteristics of an ideal op amp.
b) What is the input impedance of a non inverting op amp?
c) Define CMRR.
d) List different types of comparators.
e) What is a window detector?
f) How would you recognize that positive feedback is being used in an op amp circuit?
g) What is the purpose of clipper?
h) List various A/D conversion techniques.
i) What is the fastest ADC why?
j) Define duty cycle.
k) List some applications of timer in mono stable mode.
l) Define pass band and stop band of a filter.

UNIT - I [1 x 12 = 12M]

2. a) Explain briefly about pole zero compensation.
2. b) A square wave of peak to peak amplitude of 500 m V has to be amplified to a peak to peak amplitude of 3 V, with a rise time of 4 μsec or less. Can a 741 be used? (OR)
3. a) Draw and explain the operation of voltage to current and current to voltage converters.
3. b) Explain the operation of practical integrator circuit.

UNIT - II [1 x 12 = 12M]

4. a) Draw and explain the Wein bridge oscillator with necessary expressions.
4. b) Design a square wave oscillator for f = 1 K Hz. The op amp is a 741 with supply voltages +15 V or -15 V. (OR)
5. a) Explain any two applications of schmih trigger.
5. b) A schmih trigger with the upper threshold level VUT = 0V and hysteresis width VH = 0.2 V converts a 1 K Hz sine wave of amplitude 4 Vpp into a square wave. Calculate the time duration of the negative and positive portion of the output waveform.

UNIT - III [1 x 12 = 12M]

6. Explain about shunt clippers. (OR)
7. a) Explain the counter type A/D converter.
7. b) How many levels are possible in a two bit DAC? What is the resolution if the output range is 0 to 3 V?

UNIT - IV [1 x 12 = 12M]

8. a) Briefly discuss any three PLL applications.
8. b) Calculate output frequency f0, lock range ΔfL of a 565 PLL. If RT = 10 K Ohms, CT = 0.01 μF and C = 10 μF (OR)
9. Explain briefly about band reject filters.

### Related Question Papers:

• Elements of Mechanical Engineering - Bapatla Engineering College - B.Tech 2nd Year - 2nd Semester - June 2014

• Bapatla Engineering College - Electrical and Electronic Measurements - B.Tech 2nd Year - 2nd Semester - June 2014

• B.Tech 2nd Year - 2nd Semester - Bapatla Engineering College - Electronic Circuits I - June 2014

• B.Tech 2nd Year - 2nd Semester - Data Structures using C - Bapatla Engineering College - June 2014

• Signals and Systems - Bapatla Engineering College - II/IV B.Tech - 2nd Semester - June 2014

• ### Categories

Submit Previous Years University Question Papers and make money from adsense revenue sharing program

Are you preparing for a university examination? Download model question papers and practise before you write the exam.

 Join Group

Top Contributors
TodayLast 7 Daysmore...