Resources » Articles/Knowledge Sharing » Syllabus

# EE1291 ELECTRICAL ENGINEERING AND CONTROL SYSTEMS Syllabus - Anna university

 Posted Date: 13-Aug-2008 Last Updated: 13-Aug-2008 Category: Syllabus Author: Ramkumar Member Level: Gold Points: 2

Find the detail on EE1291 ELECTRICAL ENGINEERING AND CONTROL SYSTEMS Syllabus - Anna university.

EE1291 ELECTRICAL ENGINEERING AND CONTROL SYSTEMS

PART – A ELECTRICAL ENGINEERING 4 0 0 100

AIM
To expose the students to the basic concept of circuits and machines.

OBJECTIVES
1. To study Kirchoff’s laws and be able to do simple problems using mesh and nodal analysis.
2. To study the phasor representation, complex power and three phase circuits and do simple problems.
3. To study qualitatively about the construction and principle of operation of D.C. machines and to do simple problems.
4. To study qualitatively the construction and principle of operation of transformers and three phase induction motors and to do simple problems.
5. To study qualitatively the construction details and principle of operation of single-phase induction motor and special machines.

UNIT I D.C. CIRCUITS 6
Kirchoff’s laws – simple resistance circuits – mesh and nodal analysis – simple problems.

UNIT II A.C. CIRCUITS 6
Sinusoidal voltage – RMS ,average and peak values – phasor representation – power factor – single phase RC,RL and RLC circuits – simple series and parallel circuits – complex power – three phase circuits – line and phase values – power measurement – simple problems.

UNIT III D.C. MACHINES (QUALITATIVE TREATMENT ONLY) 6
Constructional details and operating principle of D.C. generators – emf equation – characteristics – principle of operation of D.C. motors – characteristics – starting.

UNIT IV TRANSFORMERS AND THREE PHASE INDUCTION MOTORS
(QUALITATIVE TREATMENT ONLY) 7
Constructional details and principle of operation of transformers – emf equation – parameters of transformers – regulation, losses and efficiency - introduction to three phase transformers. constructional details and principle of operation of three phase induction motor – characteristics- starting – losses and efficiency.

UNIT V SINGLE PHASE INDUCTION MOTORS AND SPECIAL MACHINES (QUALITATIVE TREATMENT) 5
Constructional details and principle of operation of single phase induction motors – starting – servomotor, stepper motor, variable reluctance motors.-applications.
L = 30
TEXT BOOK
1. D.P.Kothari and I.J. Nagrath “Basic Electrical Engineering”, Tata McGraw Hill Ltd, second edition, 2002.
REFERENCES
1. Stephen J.Chapman “Electrical Machinery Fundamentals”, McGraw Hill Publishing Company Ltd, third edition, 1999.
2. K.Murugesh Kumar, “Electric Machines”, Vikas Publishing House (P) Ltd, 2002.

PART – B CONTROL SYSTEMS
AIM

1. To expose the students to the basic concepts of control systems.

OBJECTIVES

1. To study control problem, control system dynamics and feedback principles.

2. To study time response of first and second order systems and basic state variable analysis and to do simple problems.

3. To study the concept of stability and criteria for stability and to do simple problems.

4. To study the frequency response through polar plots and Bode plots and Nyquist stability criteria and to do simple problems.

5. To study the different type of control system components.

UNIT I INTRODUCTION 6
The control problem – differential equation of physical systems – control over system dynamics by feedback – regenerative feedback – transfer function – block diagram - algebra – signal flow graphs.

UNIT II TIME RESPONSE ANALYSIS 6
Time response of first and second order system – steady state errors – error constants – design
specification of second order systems – state variable analysis – simple problems.

UNIT III STABILITY 6
Concept of stability – stability conditions and criteria – Hurwitz and Routh criterian – relative Stability analysis.

UNIT IV FREQUENCY RESPONSE 6
Correlation between time and frequency response – polar plots , Bode plots – stability in frequency domain using Nyquist stability criterion – simple problems.

UNIT V CONTROL SYSTEM COMPONENTS 6 Control components – servomotors , stepper motor – hydraulic and pneumatic systems.
L = 30 Total = 60
TEXT BOOK
1. I.J.Nagrath and M.Gopal “Control system Engineering” New age International Publishing Company Ltd, third edition 2003.
REFERENCES
1. M.Gopal “Control Systems – Principle and Design”, McGraw Hill Publishing Company Ltd, second edition, 2003.
2. Joseph J.Distafeno et-al “Shaums outline series – theory and Problems of Feedback
3. control systems, Tata McGraw Hill publishing company Ltd, 2003.

EXAMINATION PATTERN

In part A there shall be five questions from Electrical Engineering and five questions from control systems (one from each unit). In Part B the compulsory question shall have one part from Electrical Engineering and another from Control Systems. Each of the ‘either or’ form question shall have an Electrical Engineering part as well as Control Systems part. For example,

Q 12 (a)(i) pertains to Electrical Engineering
12(a)(ii) pertains to Control Systems

Q 12(b)(i) pertains to Electrical Engineering
Q 12(b)(ii) pertains to Control Systems

The other questions shall be set similarly.

Did you like this resource? Share it with your friends and show your love!

Responses to "EE1291 ELECTRICAL ENGINEERING AND CONTROL SYSTEMS Syllabus - Anna university"

No responses found. Be the first to respond...

Feedbacks

## Post Comment:

• Do not include your name, "with regards" etc in the comment. Write detailed comment, relevant to the topic.
• No HTML formatting and links to other web sites are allowed.
• This is a strictly moderated site. Absolutely no spam allowed.
•  Name: Sign In to fill automatically. Email: (Will not be published, but required to validate comment) Type the numbers and letters shown on the left.

### Subscribe to Email

• Get Jobs by Email
• Forum posts by Email
• Articles by Email
Active Members
TodayLast 7 Days
more...

K Mohan
Kalyani
More...