My Profile
Active Members
TodayLast 7 Days
more...
Awards & Gifts
Online Exams
Fresher Jobs
Our fresher job section is exclusively for fresh graduates! Find jobs for freshers in major Indian
cities including Bangalore, Chennai, Hyderabad, Pune or Kochi
Resources
Find educational articles, blogs, discussion threads and other resources.
Colleges
Find details about any college in India or search for courses.
|
JNTU III YEAR B.TECH. C.E. I –SEMESTER syllabus for DESIGN OF REINFORCED CONCRETE STRUCTURES
Posted Date: 13 Aug 2008 Resource Type: Articles/Knowledge Sharing Category: Syllabus
|
Posted By: sunil Member Level: Diamond
Rating:  Points: 2
|
|
|
DESIGN OF REINFORCED CONCRETE STRUCTURES
UNIT –I
Introduction Materials, Constituents of concrete, recommendation of IS 456 – 2000, grades of concrete, elastic theory, design constants; singly reinforced beam.
UNIT –II
Introduction of Limit State Design : Concepts of limit state design – Basic statistical principles – Characteristic loads – Characteristic strength – Partial load and safety factors – representative stress-strain curves for cold worked deformed bars and mild steel bars. Assumptions in limit state design – stress - block parameters – limiting moment of
Resistance
UNIT –III
Beams : Limit state analysis and design of singly reinforced, doubly reinforced, T and L beam sections.
UNIT – IV
Shear, Torsion and Bond : Limit state analysis and design of section for shear and torsion – concept of bond, anchorage and development length, I.S. code provisions. Design examples in simply supported and continuous beams, detailing.
UNIT – V
Short and Long columns – under axial loads ,uniaxial bending and biaxial bending – Braced and un-braced columns – I S Code provisions.
UNIT –VI
Footings : Different types of footings – Design of isolated, square, rectangular and circular footings.
UNIT – VII
Design of Two-way slabs, one way slab, continuous slab Using I S Coefficients .
UNIT –VIII
Limit state design for serviceability for deflection, cracking and codal provision.
NOTE : All the designs to taught in Limit State Method
Following plates should be prepared by the students.
1. Reinforcement particulars of T-beams and L-beams.
2. Reinforcement detailing of continuous beams.
3. Reinforcement particulars of columns and footings.
4. Detailing of One way, Two way and continuous slabs
FINAL EXAMINATION PATTERN:
The end examination paper should consist of Part A and Part B. part A consist of two questions in Design and Drawing out of which one question is to be answered. Part B should consist of five questions and design out of which three are to be answered. Weightage for Part – A is 40% and Part- B is 60%.
TEXT BOOKS:
1. Reinforced concrete design by S.Unnikrishna Pillai & Devdas Menon, Tata Mc.Graw Hill, New Delhi.
2. Fundamentals of reinforced concrete by N.C. Sinha and S.K Roy, S. Chand publishers
3. Reinforced concrete design by N. Krishna Raju and R.N. Pranesh, New age International Publishres, New Delhi
4. Limit State Design by B.C.Punmia, Ashok Kumar Jain and Arun Kumar Jain, Laxmi, publications Pvt. Ltd., New Delhi
REFERENCES :
1. Fundamentals of Reinforced concrete design by M.L. Gambhir, Printice Hall of India Private Ltd., New Delhi.
2. Reinforced concrete structural elements – behaviour, Analysis and design by P.Purushotham, Tata Mc.Graw-Hill, 1994.
3. Design of concrete structures – Arthus H.Nilson, David Darwin, and Chorles W. Dolar, Tata Mc.Graw-Hill,
3rd Edition, 2005.
4. Reinforced concrete structures, Vol.1, by B.C.Punmia, Ashok Kumar Jain and Arun Kumar Jain, Laxmi, publications Pvt. Ltd., New Delhi
5. Reinforced concrete structures – I.C. Syal & A.K.Goel, S.Chand Publishers
6. Limit state designed of reinforced concrete – P.C.Varghese, Printice Hall of India, New Delhi
For more details, visit Http://jntu.ac.in/dap/syl.html
|
Responses
|
No responses found. Be the first to respond and make money from revenue sharing program.
|
|
Watch TV Channels
|