Resources » Admissions » Engineering Admissions
AMIE admission procedure
This article gives details about the AMIE admission procedures .
What is AMIE
AMIE stands for Associate Member of Institution of Engineers. Simply speaking, it is an engineering degree course recognized by all State Governments, Central Govt., UPSC etc as equivalent to B.E/B.Tech. That means, those who successfully complete AMIE will get equal opportunities for job as well as higher education, just like a B.E or B.Tech holder. The Institution of Engineers (India), the largest multidisciplinary body of engineers in the country is the body that prepares syllabus, conducts examination and issue certificates etc. of AMIE.
It is nonformal
The attraction with AMIE is that it is a nonformal course. Hence, anyone who meets the specified educational qualification and a keen desire to become a graduate engineer can do this course in the least possible time! This course is especially suitable for employed person, as they can study this course without being interfering their job, whether they are in India or abroad .
Who Can Study AMIE ?
Those who wish to do AMIE must passes any one of the following qualifications.
1. A recognized 3-year Polytechnic Diploma or its equivalent in any branch of engineering. (No marks restriction)
2. +2/HSC/PDC with Physics, Chemistry& Maths with minimum 45% marks.
If you possess any qualification equivalent to the above, still then you are eligible to apply for AMIE.
Those who pursue AMIE after their Diploma course are usually known as Diploma Stream Students, and others are known as Non-Diploma Stream Students.
SYLLABUS OF AMIE
The syllabus of AMIE is more or less similar to B.E/B.Tech. But the number of subjects in AMIE is very less. The AMIE syllabus has two parts:- Section A and Section B (similar to First year , Second year etc. of any formal degree course). Those who join for AMIE should first study Section A subjects, and after passing Section B he should study Section B. In Section A we study some subjects which are fundamental to engineering. In section B, we make specialized study in our chosen branch of engineering. When a student clears all subjects in both sections A and B. he is said to have passed A.M.I.E examination and becomes a graduate engineer.
Based on ones qualification, the number of subjects that a student studies in Section A varies. A diploma holder need to study only 4 subjects in Section A, while a non-diploma/+2 holder studies 10 subjects in Section A.
Following are the subjects in Section A
1. Fundamentals of Design and Manufacturing
2. Material Science and Engineering
3. Computing and Informatics
4. Society and Environment
5. Mechanical science
6. Engineering Physics and Chemistry
7. Engineering Drawing and Graphics
8. Electronics and Instrumentation
9. Engineering Mathematics
10. Electrical Science.
On completion of section A, a student takes admission to Section B. In section B, student is asked to select a branch of engineering. Following are the engineering branches available.
1. Electronics and communication Engineering
2. Electrical Engineering
3. Computer Science and Engineering
4. Civil Engineering
5. Mechanical Engineering
6. Production Engineering
7. Chemical Engineering
8. Materials and Metallurgical Engineering
9. Mining Engineering
10. Production Engineering
11. Textile Engineering
12. Architectural Engineering.
Of the above engineering branches available, a student can choose ANY branch as he wishes, without any criteria. This is one of the attractions of AMIE. For example, a student studied Automobile engineering in Diploma level can choose Computer Science or Electronics etc in AMIE !!!!
Both Diploma and Non-diploma holders should study 9 subjects in Section B. In order to impart practical knowledge, the Institution of Engineers has included project work and lab experiments as part of section B syllabus.
In short, a +2 holder can complete AMIE by clearing just 10 + 9 = 19 subjects, whereas for a diploma holder, the total subject is 4 + 9 = 13 only.
The project work may be done in the same firm/company where the student is presently engaged in. For carrying out laboratory experiment, the Institution of Engineers will contact the authorities of some engineering college/similar technical institution nearest to the location of the student and make necessary arrangement. For this, a nominal fee of Rs 1000/- will be charged from the student.
The attraction of AMIE is its flexibility in completion time. Apart from conventional courses, the AMIE doesn’t have a fixed ‘completion time’. Normally 6 years are available for clearing Section A subjects and another 6 years for completing Section B.
AMIE examinations are conducted in the first week of June and December every year. There are a lot of examination centers in India and Abroad. A student can appear for maximum 4 subjects at a time. Thus, a diploma holder can write all the 4 subjects of Section A in single appearance. Examination fee is Rs 1200/- per appearance (not per subject). The examination centre need be selected only at the time of submitting application form for examination.
HOW TO JOIN
For appearing AMIE examinations, one should get membership with Institution of Engineers. In order to get membership you should apply in the prescribed application form. Application form for membership registration can be had directly from any of the local centers of Institution of Engineers at a cost of 100/-.
Diploma holders should apply for senior Technician Membership, and +2 (or equivalent) holders should apply for Technician membership.
If you haven’t applied for registration so far, do it before August 2008, so that you may be eligible to appear for next examination in December 2008. Once you submitted the application form for registration, you must wait for at least 3 months for getting your registration confirmation letter. But if you have properly filled up the form and have remitted the correct amount of registration fee (Rs 3565/-), then definitely you will get the registration.
Along with the application form, you should attach the following.
1. Two passport size photographs to be affixed on the application form.
2. Attested copy of Matriculation/School leaving certificate to prove your age.
3. Attested copy of +2/HSC certificate (if applicable) to prove your educational qualification
4. Attested copy of you Diploma certificate and marks sheet (if applicable) to prove your educational qualification.
5. Demand draft of Rs 3565/- drawn in favour of ‘Institution of Engineers (India)’, Payable at Kolkota.
6. Write your name and address on the reverse of the Demand Draft.
7. Keep a Xerox copy of all that you send.
8. Get your qualification and identity verified by any AMIE/MIE/FIE holder. In order to do this you have to conduct any AMIE/MIE/FIE holder and he will attest your photograph on the application form, and on production of your certificate he will verify your qualification on the space provided on the application form. Regarding this attestation you can contact any local/State centre nearest to you.
9. Send this application form to IEI, Kolkota at the earliest. If the application form reaches there before August, you will be eligible to appear for December examination.
Once you send the application form to Kolkota, you may not get any correspondence from there for 2 to 3 months. This doesn’t mean that your application was not considered. Normally it takes 2 to 3 months to process your application form. During processing your application form, first your will get an acknowledgement letter mentioning your ‘RS number’. You can note this number for further enquiry regarding your membership (only if it gets delayed too much).
Did you like this resource? Share it with your friends and show your love!
|Guest Author: viresh 27 Nov 2011|
Admission form not available in pune amie college, give me any suggetion,
|Guest Author: Kiran 27 Oct 2012|
I have BSC.degree in Chemistry with Chemistry,Biology and physics subjects. So can I aligible to apply for AMIE degree ?
Please guide me.
|Guest Author: marxin 20 Mar 2013|
|I am a student of +2 commerce. I would like to AMIE. Is it possible for me to do? Please help me with suitable advises.|
|Guest Author: supriya mule 30 Jun 2013|
|Sir. Can you tell about the AMIE admission procedure? Tell me last date and procedure information about AMIE admission.|
|Guest Author: Ajeesh Kumar 17 Jun 2014|
I am working in TATA at Jamshedpur.My native is kerala, I want to join AMIE(Diploma Holder).
|Guest Author: suryanarayan sahoo 26 Jun 2014|
|I don't know who are AMIE /MIE lol /FIE holder. So please guide me sir.|
|Guest Author: Naresh kumar 19 Aug 2014|
|Sir, I am Naresh Kumar from Haryana in Dist Hisar |
I am diploma holder in civil Engg and I want to do AMIE, sir please tell me my nearest center
|Guest Author: jaswinder 30 Aug 2014|
|My name is Jaswinder. Please tells me sir how many years this course|
Return to Article Index
Active MembersTodayLast 7 Daysmore...