Members Bookmarks Fresher Jobs Funny Photos B.Tech Projects New Member FAQ  



My Profile
Active Members
TodayLast 7 Days more...



Awards & Gifts
Online Exams

Fresher Jobs


Our fresher job section is exclusively for fresh graduates! Find jobs for freshers in major Indian cities including Bangalore, Chennai, Hyderabad, Pune or Kochi

Resources


Find educational articles, blogs, discussion threads and other resources.

Colleges


Find details about any college in India or search for courses.

Paid Surveys


website counter



Frequently Asked Questions -Telecommunication


Posted Date: 16 Feb 2008    Resource Type: Articles/Knowledge Sharing    Category: Study Abroad

Posted By: Girish Patil       Member Level: Diamond
Rating:     Points: 5



Frequently Asked Questions -Telecommunication

A well-known telecommunications company uses this pop quiz for oral and written examinations of applicants for engineering positions.

1. A 2MB PCM(pulse code modulation) has…

a) 32 channels
b) 30 voice channels & 1 signaling channel.
c) 31 voice channels & 1 signaling channel.
d) 32 channels out of which 30 voice channels, 1 signaling channel, & 1 synchronization channel.

Ans: c

2. Time taken for 1 satellite hop in voice communication is…

a) 1/2 second
b) 1 seconds
c) 4 seconds
d) 2 seconds

Ans: (a)

3. Max number of satellite hops allowed in voice communication is:

a) only one
b) more han one
c) two hops
d) four hops

Ans: (c)

4. What is the maximal decimal number that can be accommodated in a byte?

a) 128
b) 256
c) 255
d) 512

Ans: (c)

5. Conditional results after execution of an instruction in a micro processor is stored in…

a) register
b) accumulator
c) flag register
d) flag register part of PSW(Program Status Word)

Ans: (d)

6. Frequency at which VOICE is sampled is…

a) 4 KHz
b) 8 KHz
c) 16 KHz
d) 64 KHz

Ans: (a)

7. Line of sight is…

a) Straight Line
b) Parabolic
c) Tx & Rx should be visible to each other
d) none of the above

Ans: (c)

8. Purpose of PC(Program Counter) in a MicroProcessor is…

a) To store address of TOS(Top Of Stack)
b) To store address of next instruction to be executed.
c) count the number of instructions.
d) to store base address of the stack.

Ans: (b)

9. What action is taken when the processor under execution is interrupted by a non-maskable interrupt?

a) Processor serves the interrupt request after completing the execution of the current instruction.
b) Processor serves the interrupt request after completing the current task.
c) Processor serves the interrupt request immediately.
d) Processor serving the interrupt request depends upon the priority of the current task under execution.

Ans: (a)

10. The status of the Kernel is…

a) task
b) process
c) not defined.
d) none of the above.

Ans: (b)

11. What is the nominal voltage required in subscriber loop connected to local exchange?

a) +48 volts
b) -48 volts
c) 230 volts
d) 110 volts

12. To send a data packet using datagram , connection will be established…

a) before data transmission.
b) connection is not established before data transmission.
c) no connection is required.
d) none of the above.

Ans: (c)

13. Word alignment is…

a) aligning the address to the next word boundary of the machine.
b) aligning to an even boundary.
c) aligning to a word boundary.
d) none of the above.

Ans: (a)

14. When a C function call is made, the order in which parameters passed to the function are pushed into the stack is…

a) left to right
b) right to left
c) bigger variables are moved first than the smaller variales.
d) smaller variables are moved first than the bigger ones.
e) none of the above.

Ans: (b)

15. What is the type of signaling used between two exchanges?

a) inband
b) common channel signaling
c) any of the above
d) none of the above.

Ans: (a)

16. Buffering is…

a) the process of temporarily storing the data to allow for small variation in device speeds
b) a method to reduce cross talks
c) storage of data within transmitting medium until the receiver is ready to receive.
d) a method to reduce routing overhead.

Ans: (a)

17. Memory allocation of variables declared in a program is…

a) allocated in RAM.
b) allocated in ROM.
c) allocated on stack.
d) assigned to registers.

Ans: (c)

18. A software that allows a personal computer to pretend as a computer terminal is …

a) terminal adapter
b) bulletin board
c) modem
d) terminal emulation

Ans: (d)





Responses

Author: Shyni     31 May 2008Member Level: Gold   Points : 2
Thanks for the information


Feedbacks      
Popular Tags   What are tags ?   Search Tags  
(No tags found.)

Post Feedback


This is a strictly moderated forum. Only approved messages will appear in the site. Please use 'Spell Check' in Google toolbar before you submit.
You must Sign In to post a response.
Next Resource: Database Top 51 interview questions
Previous Resource: BluetoothPreparation
Return to Discussion Resource Index
Post New Resource
Category: Study Abroad


Post resources and earn money!
 
Related Resources


Contact Us    Privacy Policy    Terms Of Use   

SpiderWorks Technologies Pvt Ltd. 2006 - 2007 All Rights Reserved.