Training Centers » IT - Networking/Hardware » General » Chip Integration Technologies Ltd

ARM 7/9 Controllers (System Design & Embedded C Programming)

Posted By: Saranya    Member Level: Gold     Posted Date: 11 Nov 2009  

Training Center Chip Integration Technologies Ltd
Course Name ARM 7/9 Controllers (System Design & Embedded C Programming)
Category General
Fees Rs. 10,000/-
Duration 30 Days (2 Hours/Day)
Location Bangalore, Karnataka

ARM 7/9 Controllers (System Design & Embedded C Programming)

Modules:

Introduction
PIN Configuration
PIN Connect Block
LPC2126- Memory Addressing
GPIO
System Control Block
UART0
UART1
Memory Acceleration Module(MAM) I2C Interface
SPI Interface
CAN Controller and Acceptance Filter Real Time Clock
Unix Internals
Timer 0 and Timer 1
Watch Dog
Flash Memory System and Programming
Pulse Width Modulation(PWM) Embedded ICE Logic
A/D Converter
Real Monitor


More Training Courses in Chip Integration Technologies Ltd

Add Course to this Training Center
Course NameCategoryDurationFees
Web Based ApplicationsGeneral2 Months (2 Hours/Class, 3 Days/Week)Not Mentioned
Advanced diploma in embedded system & RTOS engineeringGeneral 120 days (4 hrs /day)Rs. 25,000/-
Advanced diploma in VLSIGeneral 120 days (4 hrs /day)Rs. 25,000/-
Embedded Linux Level 1 (ARM 9/11, XSCALE, POWER PC)General 30 Days (2 Hrs/Day)Rs. 12,000/-
Embedded Linux Level 2 (ARM 9/11, XSCALE, POWER PC)General45 Days (3 Hrs/Day)Rs. 12,000/-
Device Driver Development on ARM 9/10General30 Days (2 Hrs/Day)Rs. 12,000/-
VX Works Programming on X-86 PlatformGeneral30 Days (2 Hours/Day)Rs. 10,000/-
PIC Controllers (System Design & Embedded C)General30 Days (2 Hours/Day)Rs. 8,000/-
8051/Embedded C ProgrammingGeneral15 Days (2 Hours/Day)Rs. 8,000/-
VX Works Device Drivers/BSPGeneral15 Days (2 Hours/Day)Rs. 5,000/-
Telecom TestingGeneral45 Days (3 Hours/Day)Rs. 15,000/-
Linux Network/ Kernel Module programmingGeneral30 Days (2 Hours/Day)Rs. 8,000/-
RTOS CourseGeneral2 Months (2 Hours/Class, 3 Days/Week)Not Mentioned
Time Critical ApplicationsGeneral2 Months (2 Hours/Class, 3 Days/Week)Not Mentioned
Single Board Embedded ApplicationsGeneral2 Months (2 Hours/Class, 3 Days/Week)Not Mentioned
Device DriversGeneral2 Months (2 Hours/Class, 3 Days/Week)Not Mentioned
Artificial Intelligenc, Machine Vision & RoboticsGeneral2 Months (2 Hours/Class, 3 Days/Week)Not Mentioned
Digital Signal Processing (DSP)General2 Months (2 Hours/Class, 3 Days/Week)Not Mentioned
Medical ImagingGeneral2 Months (2 Hours/Class, 3 Days/Week)Not Mentioned
Embedded Solutions for Medical IndustryGeneral2 Months (2 Hours/Class, 3 Days/Week)Not Mentioned
Embedded Industrial Automation, PLC, PID, CNCGeneral2 Months (2 Hours/Class, 3 Days/Week)Not Mentioned

Add Course to this training Center




More Training Courses in Karnataka

Return to Training Centers
Add New Course to this Training Center
Post New Training center
Search Courses

  • ARM 7/9 Controllers (System Design & Embedded C Programming) courses in Bangalore
  • ARM 7/9 Controllers (System Design & Embedded C Programming) courses in Karnataka
  • ARM 7/9 Controllers (System Design & Embedded C Programming) courses in India

  • General courses in Bangalore
  • General courses in Karnataka
  • General courses in India

  • Awards & Gifts
    Active Members
    TodayLast 7 Daysmore...

    ISC Technologies, Kochi - India. Copyright © All Rights Reserved.