Janardan Rai Nagar Rajasthan Vidyapeeth B-Tech Electrical University model question papers



Download Model question papers & previous years question papers

Posted Date: 04 Sep 2008      Posted By:: Megha    Member Level: Silver  Points: 5 (₹ 1)

2007 Janardan Rai Nagar Rajasthan Vidyapeeth B.Tech Electrical Engineering B-Tech Electrical University Question paper



Course: B.Tech Electrical Engineering   University/board: Janardan Rai Nagar Rajasthan Vidyapeeth





BIT - III TOTAL PAGES:02
BACHELOR IN TECHNOLOGY
(SEMESTER – III) (AERONAUTICAL/CHEMICAL/ELECTRICAL/MARINE/MECHANICAL/MINING/METALLURGY)
BSAE2/BSCH2/BSE2/BSMR2/BSM2/BSMI2/BSMT2-THERMODYNAMICS
TIME: 03 HOURS MAX. MARKS: 75

GENERAL INSTRUCTIONS:
1. Question paper is divided into three groups
2. Each group is of 25 marks each
3. Figure to the right in bracket indicates mark
4. Assume suitable data if necessary
GROUP A: Answer any three questions. Question No. 1 is compulsory.
Q.1 Explain the method of determining the indicated power of a multi-cylinder engine without using an indicator. (05)
Q.2 Air at 1 bar and 300C is to be compressed to 1.2 bar at the rate of 50m3/min. Find the power required by a Roof s blower. (10)
Q.3 Explain the working of Modern Carburetor ? (10)
Q.4 Air at 1 bar and 30o C is to be compressed to 1.2 bar at the rate of 50 m3/min. Find the power required by a Roofs blower (10)
Q.5 The following data refer to a test on a petrol engine: Indicated power = 30kW; Brake power = 26; Engine speed = 1800 rpm; Fuel per brake power hour =0.35 kg;Calorific value of the fuel used = 44 100 kJ/Kg(10)
GROUP B: Answer any three questions. Question No. 6 is compulsory.
Q.6 Differentiate between petrol and diesel engine? (05)
Q.7 Air at 1 bar and 30o C is to be compressed to 1.2 bar at the rate of 50 m3/min. Find the power required by a Roofs blower (10)
Q.8 A compressor has 150 mm bore and 200mm stroke and the linear clearance is 10 mm. Calculate the theoretical volume of air taken in m3 per stroke when working between 1 bar and 7 bar. Take n=1.25. (10)
Q.9 A cylinder contain steam at a pressure of 7 bar and 0.95 dry. The steam is expandisothermally and reversibly to a pressure of 1.5 bar. Find: 1. the final condition of steam; 2. the change in enthalpy; 3. the change in internal energy; 4. the change in entropy; 5. the heat transferred; and 6. the work done per Kg of steam. (10)
Q.10. An ideal engine is imagined to be working on carnot's. The working fluid received heat at the temperature of 590K. and rejects at a temperature of 295K. Find the theoretical efficiency of the cycle. If the engine working on this cycle absorbs35 kJ/s from the hot body, calculate the net work done per second (10)

GROUP C: All Questions are Compulsory.
Q.11 Fill in the blanks (each question carries 2 marks)
(i) In two stage compression with intercooler, the effect of clearance is
_______.
(ii) Mechanical efficiency is the ratio of the ________power to the
__________power.
(iii) The _________rings are housed in the circumferential grooves provided
on the outer surface of the piston.
(iv) The brake power is the power available at the __________.
(v) Merge test is preferred on a _______petrol or diesel engine.
Q.12 Multiple choice question. (Each question carries 2 marks)
(i) Unit of specific entropy is _____________
(a) bar (b)m3/kg (c) KJ/Kg.K (d) None of this
(ii) Motoring test measures ________________.
(a) B.P (b)I.P (c)F.P (d)C.V
(iii) Heat carried away by exhaust gas _________________.
(a) MgCp (Tg- Tr) (b) MgCv (Tg- Tr) (c) MgCp (Tg+ Tr) (d) MgCv (Tg- Tr)
(iv) 1 bar =________________.
(a) 1 x 105 N/ cm2 (b) 10 x 105 N/ cm2 (c)100 x 105 N/ cm2
(d)1000 x 105 N/ cm2
(v) Morse test is used for __________________.
(a) Finding out I.P. (b) Finding out dryness fraction (c)Calculation of Entropy (d) None of above

Q.13 True or false (each question carries 1 mark).
(i) In a boiler various heat losses take place the biggest loss is due to moisture
in fuel.
(ii) If the flow of air through the compressor is perpendicular to its axis, then
it is a centrifugal compressor.
(iii) The isentropic process on h-s diagram will be a vertical line.
(iv) The efficiency of carnot cycle may be increased by increasing the
highest temperature.
(v) A compressor mostly used for supercharging of I.C engines is roots
blower.





Return to question paper search

Next Question Paper: DIGITAL ELECTRONICS

Previous Question Paper: III B.Tech I Semester Regular Examinations, November 2006 DIGITAL SIGNAL PROCESSING

Related Question Papers:


  • MSCI03-ELECTRONIC INSTRUMENTS AND SYSTEMS


  • MSCI 01 – INDUSTRIAL INSTRUMENTATION AND CONTROL


  • MSVD03-VERNILOG HARDWARE DESCRIPTION LANGUAGE


  • MSVD02-ANALOG VLSI DESIGN


  • MSVD01 – EMBEDDED SYSTEM DESIGN


  • Categories


    Submit Previous Years University Question Papers and make money from adsense revenue sharing program

    Are you preparing for a university examination? Download model question papers and practise before you write the exam.


    Looking for University or College admissions in India for 2021 - 2022 Academic Year?

    APPLY NOW
    Top Contributors
    TodayLast 7 Daysmore...

    Awards & Gifts
     
    SpiderWorks Technologies Pvt Ltd, Kochi - India. © All Rights Reserved.