Diploma Engineering (4th Semester) Exam.,2010. Sub.:-Electrical Machine-II.,Paper: DEE-401, Full Marks:70, Time: 3 hours,This Question paper belongs to Tipura Instituteof Technology under Tripura University model question papers

Download Model question papers & previous years question papers

Posted Date: 10 Oct 2010      Posted By:: Rupesh Das    Member Level: Silver  Points: 5 (₹ 1)

2010 Diploma Electrical Engineering (DEE) Diploma Engineering (4th Semester) Exam.,2010. Sub.:-Electrical Machine-II.,Paper: DEE-401, Full Marks:70, Time: 3 hours,This Question paper belongs to Tipura Instituteof Technology under Tripura University Question paper

Course: Diploma Electrical Engineering (DEE)   University/board: Tripura University

Diploma Engineering (4th Semester)
Exam., 2010


Paper: DEE-401

Full Marks:70

Time:3 hours

The figures in the margin indicate full marks
for the questions
Write the answers to each Half in a separate book


Answer Question No.1 and three from the rest

1. (a) What types of alternator will be used for (i) hydraulic turbines
and (ii) steam turbines, as prime movers?
(b) Name essential elements for generating e.m.f. in alternators.
(c) Why will a 3-phase synchronous motor always run at synchronous speed?
(d) How hunting of synchronous motor be minimized?

2. (a) What is meant by synchronous condenser?
(b) How is the synchronous motor made self-starting?
(c) Draw the phaser diagram of a synchronous motor operating at
overexcited and underexcited conditions.
[Marks: 3+2+4=9]

3. (a) Explain 'V' and inverted 'V' curves.
(b) A 20-pole, 693-volt, 50-Hz, 3-phase, delta-connected synchronous
motor is operating at no load with normal excitation. It has armature
resistance per phase of zero and synchronous reactance of 10 ?. If the
rotor is retarded by 0.5®(mechanical) from its synchronous position,
(i) the rotor displacement in electrical degrees; (b) the armature e.m.f. per phase.

4. (a) Write the advantages of stationary armature and rotating field in an alternator.
(b) Find the no-load phase and the line voltage of a star-connected 3-phase,
8-pole alternator which runs at 1200 r.p.m, having flux per pole of 100 mWb
sinusoidally distributed. Its stator has 72 slots having double-layer
winding. Each coil has 8 turns and the coil is chorded by 1 slot.

5. (a) Derive e.m.f. equation of alternator and explaine the coil-span factor
and distribution factor.
(b) When the load on an alternator is varied, its terminal voltage is
also found to be varied. Why?

6. (a) What are the effects on voltage regulation of an alternator of power
factor (i) at lagging power factor and (ii) at leading power factor?
(b) A 100-KVA, 3000-V. 50Hz, 3-phase, star-connected alternator has
effective armature resistance of 0.2?. The field current of 40A produces
short circuit current of 200A and an open circuit e.m.f. of 1040V (line value).
Calculate the full-load voltage regulation at 0.8 power factor lagging.

Answer Question No. 7 and any three from the rest

7. (a) Why is induction motor called 'asynchronous'?
(b) How can the direction of rotation of the 3-phase induction motor be reversed?
(c) What is slip of an induction motor?
(d) What are the losses in a 3-phase induction motor?

8. (a) Explain why it is not possible for the rotor speed to be equal to
that of the revolving field.
(b) A 4-pole, 3-phase induction motor operates from a supply
whose frequency is 50 Hz. Calculate (i) the speed at which
the magnetic field of the stator
is rotating, (ii) the speed of the rotor when the slip is 4%,
(iii) the frequency of the rotor currents when n slip is 0.03,
and (iv) the frequency of the currents at standstill.

9. (a) How will you improve the starting torque of a 3-phase induction motor?
(b) Why are the slots on the rotor of squirrel cage induction motors usually skewed?
(c) A 3-phase, 50-Hz, 8-pole induction motor has a full-load slip of 4%.
The rotor resistance is 0.001?/phase. Find the ratio of maximum to full-load
torque and the speed at which the maximum torque occurs.

10. (a) Why do we require starters for starting 3-phase induction motor?
(b) Name various types of starter used for starting squirrel cage motor.
(c) An 8-pole, 3-phase, 50-Hz induction motor is running at a speed of 710 r.p.m.
with an input power of 35 kW. The stator losses at this operating
condition are known to be 1200 watt, while the rotational losses are 600 watt.
Find (i) the rotor copper loss, (ii) the gross torque developed, and
(iii) the mechanical power output.

11. (a) Explain why a single-phase motor is not self-starting.
(b) Classify single-phase motor depending on their constructions and methods of starting.
(c) Draw the circuit and vector diagrams of a capacitor-start induction-run motor.

12. (a) Explain the terms 'Crawling' and 'Cogging'.
(b) Name various methods by which speed control of induction motors is achieved.

Return to question paper search

Next Question Paper: Me 04 603-colputer integrated system

Previous Question Paper: Immunology and Immunotechnology (June 2009)

Related Question Papers:


Submit Previous Years University Question Papers and make money from adsense revenue sharing program

Are you preparing for a university examination? Download model question papers and practise before you write the exam.

Looking for University or College admissions in India for 2022 - 2023 Academic Year?

Top Contributors
TodayLast 7 Daysmore...

Awards & Gifts
SpiderWorks Technologies Pvt Ltd, Kochi - India. © All Rights Reserved.