Central Institue of Tool Design, Hyderabad admissions 2019 PGDTD & CC, PDTD courses

MSME Tool Room, Central Institue of Tool Design (CITD), Hyderabad has announced admissions into Post Graduate Diploma in Tool Design & CAD/ CAM (PGDTD & CC) and Post Diploma in Tool Design (PDTD) course. Check out more details like admission process, eligibility criteria, selection procedure, important dates etc.

About CITD

Micro, Small and Medium Entreprises (MSME) Tool Room, Central Institue of Tool Design (CITD) is a premier technical training institution of India. It was established in the year 1968 by the Government of India with the assistance of ILO and UNDP. CITD provides specialized training courses such as Diploma, Post Diploma, Post Graduate, Certificate, M.E, M.Tech in CAD, CAM, Tool Design and Manufacturing, VLSI, CAE, Embedded Systems, Mechatronics, Electronics, and Robotics.

Admissions 2019

MSME Tool Room, Central Institute of Tool Design, Hyderabad has announced admissions 2019 into the following two courses:

  1. Post Graduate Diploma in Tool Design & CAD/ CAM (PGDTD & CC) - 1 1/2 years (3 Semesters)
  2. Post Diploma in Tool Design (PDTD) - 1 year (2 Semesters)
Total intake of students for PGDTD & CC and PDTD courses is each 60.

Eligibility criteria

Candidates have to fulfil the following eligibility criteria to apply for admission in CITD, Hyderabad:

  • Candidates with qualification - B.E/ B.Tech. in Mechanical Engineering/ Production Engineering or equivalent can apply.
  • Maximum age limit is 45 years.
  • Candidates with qualification - Diploma in Mechanical Engineering/ Tool, Die and Mould Making or equivalent.
  • Maximum age limit is 27 years (relaxation up to 5 years for SC/ ST candidates).

Fee details

  • Registration Fee: Rs. 1800/-
  • Course Fee: Rs. 35,000/- per semester
  • Caution Deposit: Rs. 5000/-
  • Registration Fee: Rs. 1200/-
  • Course Fee: Rs. 25,000/- per semester
  • Caution Deposit: Rs. 5000/-

Application process

Interested and eligible candidates are requested to download the application form and prospectus from the college official website. And candidates have to send the filled in application form along with the application fee to the address mentioned below.

The Director (Trg.),
Hyderabad - 500 037

Application fee details

Application fee for Post Graduate Diploma course is Rs. 800/- for general and Rs. 400/- for SC/ ST candidates. For Post Diploma course is Rs. 700/- for general and Rs. 350/- for SC/ ST candidates. Candidates can pay the application fee in two modes.

Offline mode:
Candidates paying in offline mode can pay the fee through DD, which is drawn in favour of Principal Director, CITD, Hyderabad.

Online mode:
Candidates willing to pay in online mode can pay the application fee by online at the website: www.citdindia.org by selecting the "Pay Online" option.

Selection process

Selection of candidates for admission is done based on the candidate's performance in the entrance examination conducted at CITD, Balanagar, Hyderabad. The entrance exam consists of 100 objective type questions and the duration of the exam is 1 1/2 hours. Tentative date of entrance examination is 18th August 2019.

Entrance exam Syllabus

Questions will be from the 3-year syllabus of Diploma in Mechanical Engineering in Tool, Die & Mould Making.

Questions will be from subjects - Engineering materials, Foundry, Welding, Metal Working, Machine Tools, Machining Process, Limits, Fits and Tolerance, Industrial Engineering, Strength of Materials, Theory of Machines, Machine Design, Statics, Dynamics, Production Management, Metrology, Engineering Drawing, Psychometric Test.

Counselling details

Based on candidates performance in the entrance test, a merit list will be displayed on the notice board of the college and on the college website. As per the merit list, candidates are required to attend the counselling along with the documents mentioned below:

  1. Original Certificates of the qualifying examination.
  2. Certificate of Physical Fitness form any Assistant Civil Surgeon.
  3. Undertaking for good conduct and behavior and to abide the rules and regulations.

Contact details

Admission Desk at Room No. 102,
Diploma Block,

Phone No. 9502405170, 040 23771959
Email: adminltrg@citdindia.org
Website: www.citdindia.org

Important dates to remember

  • Start date of availability of applications: 8th July 2019
  • Last date for the receipt of filled in applications: 14th August 2019
  • Date of Entrance Examination: 18th August 2019

Related Articles

How to register online for B.E., B.Tech., B.Arch JAC Delhi admissions 2016-2017

Want to register for Joint Admission Counselling (JAC) Delhi 2016? This article provides complete information on the Joint Admission Counselling (JAC) Delhi 2016 registration process for admission to B.E., B.Tech., B.Arch programs at Delhi universities and institutes. You will also get details of the admission and annual fees of the courses at each institute.

MH admissions 2016 to Diploma in Pharmacy, Surface Coating Tech., Hotel Management & Catering Tech.

Seeking post HSC admission to full time professional diploma technical courses in Maharashtra state? Want to take admission to first year of Diploma courses in Pharmacy, Surface Coating Technology, Hotel Management and Catering Technology for academic year 2016 – 2017 in any Maharashtra Govt., Government aided and unaided private institution? Get here how to register online application, confirm it at Facilitation Centers as well verify all documents including eligibility criteria and important dates.

Study abroad LLM Maritime Law programme at University of Southampton, UK

Are you looking for information on a maritime law course offered by a foreign university? This article provides complete information about the one year LLM in Maritime Law programme offered by the the University of Southampton, UK. You will get details of the eligibility requirements, programme fee, scholarship offered, etc.

More articles: Courses Admissions Hyderabad Admissions 2019


Author: Umesh10 Jul 2019 Member Level: Platinum   Points : 4

I think that these courses namely Post Graduate Diploma in Tool Design & CAD/ CAM (PGDTD & CC) and Post Diploma in Tool Design (PDTD) will be helpful for those students who want to gain skills in this particular area. Traditionally tool design was related to designing of Jigs and Fixtures, Press Tools, Die Casting, Plastic Moulds, Cutting Tools etc but now it is being used in the field of robotics and advanced engineering projects for speciality tool designs. So, this area is now getting momentum due to automation in many of the industrial processes and emerging of robotics and artificial intelligence era.

It makes sense to apply for such skill-enhancing courses in the tool designing area so that the person can take its advantage in the career-making in this specific stream.

  • Do not include your name, "with regards" etc in the comment. Write detailed comment, relevant to the topic.
  • No HTML formatting and links to other web sites are allowed.
  • This is a strictly moderated site. Absolutely no spam allowed.
  • Name: